logo

1995 mercury tracer owner's manual


1995 mercury tracer owner's manual

Flywheel key is sheared.
A b c d C With Teflon (92-825407A12) a - Cam b - Roll Pin c - Center Pin d - O-ring.Cylinder Head Disassembly important: Note the location of valve train components for reassembly in their original location.Adjustment: Tightening the screw increases engine speed.Always stop the engine and DO NOT smoke or allow open flames or sparks in the area while servicing any part of the fuel system.57247 a b c a-Guide Plate b-Pivot Bolts Torque to 18 lb-ft (24.5 Nm) c-Guide Plate Tabs Face.Lubricate drive pin with 2-4-C w/Teflon Marine Lubricant and place into flat of shaft as shown.R Page 1A-7 specifications Propeller Information Charts Mercury/Mariner 4 (4-Stroke) Wide Open Throttle RPM : Recommended Transom Heights : 15, 20 Right Hand Rotation Standard Gear Reduction :.15:1 Diameter Pitch.Route lighting coil leads, as shown and place coil over mounting bosses of crankcase cover.Inspect and clean spark plugs.Timing is important, to prevent any unburned mixture from escaping out of the exhaust port.General information important information Section 1C - general information Table of Contents 1 C Serial Number Location.(16.01 mm) R Page 1A-3 specifications Crankshaft Runout Diameter of Crank Pin (A) Less canon sd1200 manual pdf than.002.


Sitemap